Flashpoint FR Fleece Jacket
Flame Resistant·AT-J500·New

Flashpoint FR Fleece Jacket

Supplied by Made in China
$110
Be the first to review

A 14.8 oz FRMC flame-resistant fleece jacket built for electrical crews, switchgear techs, and refinery MRO work that needs real arc-flash protection in a layer you can actually wear all day. 27 cal/cm² arc rating, HRC Category 3, NFPA 2112 certified — the same ticket that gets you into live-line and switchgear jobs, in a fleece that layers under a PPE shell or wears solo over a base layer. Mock-neck collar lined with rib knit, rib-knit cuffs and waistband, exposed-front flame-retardant zipper, inseam pocket with a hidden cell-phone sleeve, self-fabric side panel, and exterior Tyndale FR labeling for audit checks. Charcoal. S–5XL. Made in China.

Arc Rating 27Arc Thermal Performance Value · 27 cal/cm² (ASTM F1959)
HRC CAT 3NFPA 70E Hazard/Risk Category 3 · 25–40 cal/cm² range
NFPA 2112Certified flame-resistant · self-extinguishes after ignition source removed
14.8 oz FRMCFlame-Resistant Modacrylic fleece · inherent FR, no topical treatment
ColorCharcoal
Sizes · Quantity

Ordering for a crew? Enter the quantity for each size below — every size you fill gets added as its own line.

S
M
L
XL
2XL
3XL
Ships from USAIn stock, ships in 1–2 days
30-Day ReturnsOn unworn gear
Bulk Pricing10+ units qualify
Built to spec

The details that matter.

01

Rated for arc-flash and flash-fire

27 cal/cm² arc rating and NFPA 2112 compliance on the same label. Sits inside HRC Category 3, the standard spec for switchgear work, live-line MRO, and utility distribution crews.

02

14.8 oz FRMC fleece

Flame-resistant modacrylic fleece, not a topical treatment. The FR stays in the fiber for the life of the garment — through wash cycles, through solvent exposure, through every season the jacket earns.

03

Built to layer under a PPE shell

Slim-through-the-body cut that doesn’t bunch under an arc-flash suit or FR coverall. Rib cuffs and waistband seal against drafts without binding over base layers, and the mock neck stops the cold short of the collarbone.

04

Details that survive ten-hour shifts

Exposed-front FR zipper with melt-resistant tape, rib-knit mock collar, inseam pocket with a hidden cell-phone sleeve, and a self-fabric side panel that moves with the shoulder. Exterior Tyndale FR labeling for easy audit checks.

Spec Sheet.

Certification
NFPA 2112 · ATPV 12.4 cal/cm²
Fabric
88% FR cotton · 12% high-tenacity nylon
Compliance
ASTM F1506 · OSHA 1910.269
Weight
7.5 oz · built for full-shift comfort
Seams
Flat-felled with FR thread
Sizing
Regular · Tall · Short cuts
Care
Industrial wash safe · 100 cycles
Size & fit

Find your size.

All measurements are body measurements in inches. When between sizes, size up for layering room.

SizeChest (in)Sleeve (in)Length (in)
S36–3832.528
M38–403329
L42–4433.530
XL46–483431
2XL50–5234.532
3XL54–563533
4XL58–6035.534
5XL62–643635

How to measure

Chest
Measure around the fullest part of the chest, under the arms, keeping the tape level. Arms at your sides, not flexed.
Sleeve
From the center of the back of the neck, across the shoulder, and down to the wrist bone with the arm slightly bent.
Length
From the base of the back of the neck straight down to the desired hem. The Flashpoint runs hip-length — sits just below the beltline.

Customer Reviews.

No reviews yet. Be the first to review the Flashpoint FR Fleece Jacket.

Sign in to leave a review.

The Rest of the Line