Jobsite Access·SS-SH-03·New

Quad-Buckle Scanner Harness

$44

Four buckles. One quick exit. The Quad-Buckle Scanner Harness pairs a lightweight X-back webbing chassis with breakaway buckles at every quadrant, so the rig clears your body the instant a snag turns serious. Two captive-hole loop attachments keep the scanner anchored without modifying the gun, and the ambidextrous geometry means right- or left-handed pickers run the same SKU. Sized S, L, and XL on hand-washable webbing built for the warehouse floor.

ANSI Z359.11ANSI Z359.11-2014 · full-body harness for personal fall arrest

CSA Z259.10CSA Z259.10 · Class A dorsal, Class E side, and Class L sternal D-rings

Quad-BuckleFour quick-connect buckles · chest, waist, and both legs

Tool Belt ReadyLoad-bearing waist belt with accessory D-rings for tool bags

ColorAsh Black

SizeOne Size

Ships from USAIn stock, ships in 1–2 days

30-Day ReturnsOn unworn gear

Bulk Pricing10+ units qualify

Built to spec

The details that matter.

Four quick-connect buckles

Sternum, waist, and both leg straps all use stainless quick-connect buckles. Donning time goes from two minutes to thirty seconds once the straps are dialed in — no tongue-buckle fumbling with cold hands.

Five-point D-ring layout

Dorsal Class A for arrest, two Class E hip D-rings for positioning, and a Class L sternal D-ring for ladder climbing. Covers the full range of vertical work without switching harnesses.

Structured tool belt platform

Padded, load-bearing waist belt with dedicated accessory D-rings rated for a 50 lb tool load. Keep a bag and an impact wrench on the hips without compromising the fall-arrest function.

Dedicated scanner loop

A padded chest-strap loop runs a tethered barcode scanner through the harness without crossing the arrest path. Fall protection, tool access, and scan workflow — all in one rig.

Spec Sheet.

Webbing: 1" heavy-duty polyester · pre-washed
Hardware: Acetal side-release breakaway buckles
Attachments: Two captive-hole loop tethers
Compatibility: Zebra · Honeywell · Datalogic captive-hole scanners
Sizing: S · L · XL · ambidextrous geometry
Patch: SCAN SLING woven label · ash black colorway
Care: Hand wash cold · air dry · do not bleach

Size & fit

Find your size.

All measurements are body measurements in inches. When between sizes, size up for layering room.

Size	Chest (in)	Waist (in)	Weight (lb)
M/L	36–44	30–40	130–280
XL/2XL	44–54	40–52	200–420

How to measure

Chest: Measure around the fullest part of the chest under the arms, wearing the clothing you would wear on site.
Waist: Measure around the navel with the tape level. Waist belt carries the tool load, so size for the belt, not the pants.