Hi-Vis Vests·IBS-V100·Hi-Vis Lime

Fivepoint Breakaway Hi-Vis Vest

Supplied by Iron Bound Safety
$25.00

Five-point breakaway safety vest engineered for flaggers, scanner-operators, and any crew working near moving equipment. Neon lime polyester mesh breathes through the shift with 2-inch silver reflective tape on both shoulders, a horizontal torso band, and two vertical stripes running the front panels. Five hook-and-loop breakaway release points — two shoulders, both sides, and center front — clear the body the instant a strap snags. A vertical clear vinyl ID badge pocket on the right chest with a hook-and-loop flap keeps credentials in place through the shift; two lower hand pockets keep clipboards, radios, and scanners in reach. Sized S–5XL.

Hi-Vis LimeLime hi-vis mesh body with 2” silver reflective tape
5-Point BreakawayHook-and-loop release at both shoulders, both sides, and center front
360° Reflective2" silver reflective tape: shoulders, torso band, and dual front verticals
Mesh Body100% polyester knit mesh — breathable through the full shift
ColorHi-Vis Lime
SizeSelect a size
Ships from USADomestic warehousing
30-Day ReturnsOn unworn gear
Bulk Pricing10+ units qualify
Built to spec

The details that matter.

01

Five-point hook-and-loop breakaway

Two shoulders, both side seams, and the center-front placket all release on a hard pull. If a strap snags on a forklift fork, a conveyor flight, or a piece of moving equipment the vest tears clear of the body instead of pulling the wearer in. Reattach the hook-and-loop in seconds and keep working.

02

360° reflective coverage

2" silver reflective tape runs across both shoulders, around the torso, and up both front panels — the layout flaggers, scanner-operators, and night-shift crews need to be seen from any angle around moving traffic or yard equipment.

03

Knit polyester mesh, not solid shell

Open-knit mesh body breathes through 90°F shifts under a hardhat and tool belt. The mesh is heavyweight enough to hold the reflective tape flat without curling, light enough that it disappears under a winter shell when the season turns.

04

ID pocket + two lower hand pockets

Vertical clear vinyl ID badge pocket on the right chest with a hook-and-loop flap closure — the credential stays put through a full shift but comes out one-handed at the gate. Two lower exterior pockets hold a clipboard, a radio, or a tethered scanner. Sized S–5XL so a 5′5″ flagger and a 6′5″ rigger both get the right fit.

Spec Sheet.

Fabric
100% polyester mesh, solid back
Reflective
2" silver striping · 360°
Closure
5-point hook-and-loop breakaway · center-front closure
Pockets
2 lower exterior · vertical chest ID pocket with hook-and-loop flap
Care
Machine wash cold, tumble dry low
Certifications
Enhanced visibility, non-ANSI rated
Size & fit

Find your size.

All measurements are body measurements in inches. When between sizes, size up for layering room.

SizeChest (in)Length (in)
S34–3626
M38–4027
L42–4428
XL46–4829
2XL50–5230
3XL54–5631
4XL58–6032
5XL62–6433

How to measure

Chest
Measure around the fullest part of the chest under the arms, wearing the layers you would wear on site.
Length
Measured from the high shoulder seam down to the bottom hem at center back.